Navee & Brightway Instant Tuning via Bluetooth – No Chip

Remove the speed limit digitally – Unlock speeds over 30 km/h

With the digital Navee/Brightway tuning license code, you can adjust the factory speed limit of compatible e-scooters directly via Bluetooth.

The tuning is carried out entirely via an Android smartphone. The scooter does not need to be opened, and neither a tuning chip nor any other additional component is required. The unlock is completed in just a few steps and normally takes only about one minute.

After purchase, you will usually receive your personal license key as well as the link to the required tuning app within a few minutes by email.

Your Advantages

• Digital software tuning via Bluetooth
• No tuning chip required
• No opening of the scooter
• No structural modification
• Installation within a few minutes
• Activation via a secret button combination
• Automatic return to limited mode after switching off
• No visibly installed tuning hardware
• License code and instructions by email
• No shipping costs

Compatible Navee and Brightway Scooters

The license code is suitable for the following models:

Navee ST3 and ST3 Pro

Possible speed: up to 40 km/h

Navee GT3 Max and GT3 Pro

Possible speed: up to 32 km/h

Navee GT5 Max

Possible speed: up to 32 km/h

Navee N65i

Possible speed: up to 32 km/h

Navee XT5 Max and XT5 Pro

Possible speed: up to 32 km/h

Please check the full model designation of your scooter before purchasing. Similarly named vehicles may have different electronic components or software versions.

Note on the Speed Figures

The speeds stated are possible reference values and not guaranteed top speeds. The actually achievable speed depends, among other things, on the following factors:

• Model and motor power
• Battery charge level
• Battery temperature
• Rider weight and payload
• Tire pressure
• Incline or decline
• Headwind
• Outside temperature
• Road surface condition
• Firmware version of the scooter

The unlock changes the software-side speed limit but does not generate any additional motor power.

How the Tuning Works

After successful installation, the scooter behaves similarly to a tuning chip with automatic reset.

When switched on, the scooter first starts in the limited original mode at 20 km/h. The unlock is activated only by a secret button combination directly on the vehicle.

The tuning then remains active until the scooter is switched off. As soon as you switch off the scooter, the unlock is deactivated.

The next time it is switched on, the scooter starts again in the limited 20 km/h mode. To use the higher speed again, the secret button combination must be performed once more.

This means:

• Switch on: scooter starts at 20 km/h
• Perform the button combination: tuning is activated
• Switch off: unlock is deactivated
• Switch on again: scooter starts again at 20 km/h

Easy Operation via Button Combination

After the one-time software installation, you no longer need a smartphone for daily activation.

The unlock is activated directly on the scooter via the secret button combination. To deactivate it, simply switch off the scooter.

The exact button combination and all necessary steps will be provided to you together with your license code.

No Visible Tuning Hardware

Since this is purely software tuning, no tuning chip is installed in the scooter.

There is no need to:

• disconnect cables,
• modify connectors,
• replace controllers,
• open housing parts, or
• install additional modules.

After installation, there is no visibly installed tuning hardware on the vehicle.

System Requirements

For the initial installation you need:

• a compatible Navee or Brightway model,
• an Android smartphone,
• an activated Bluetooth connection,
• an internet connection to download the app, and
• the license key received by email.

The installation is intended exclusively for Android. Activation with an iPhone or iOS is not supported.

Required Android App

The following APK file is required for the Bluetooth connection:

Download BLE Socket Bridge for Android

Since the app is installed as an APK file and not via the Google Play Store, Android may ask for permission to allow apps from this source before installation.

Enable this permission exclusively for the browser or file manager used. After successful installation, you can disable the permission again in the Android settings.

Installation in a Few Steps

1. Order the license code.
2. Open the order confirmation with the license key and instructions.
3. Download the APK file to an Android smartphone.
4. Allow and complete the installation of the app.
5. Enable Bluetooth on the smartphone.
6. Switch on the Navee or Brightway scooter.
7. Make sure that no other app is connected to the scooter.
8. Open the tuning app and connect the scooter via Bluetooth.
9. Enter the license key.
10. Perform the unlock.
11. Note down the secret button combination shown.

Activation normally takes only about one minute.

If the Scooter Is Not Found

The scooter can usually only be connected to one app or one device at a time.

If the vehicle is not displayed, proceed as follows:

1. Completely close the official Navee app.
2. Quit other scooter or Bluetooth apps.
3. Disconnect from other smartphones.
4. Check Bluetooth on the Android device used.
5. Switch the scooter off and on again.
6. Reopen the tuning app.
7. Re-establish the Bluetooth connection.

Delivery of the License Code

After purchase, you will usually receive within a few minutes by email:

• your personal license key,
• the link to the required Android app,
• the installation instructions, and
• information about the secret button combination.

Since this is a digital product, there are no shipping costs and no package is sent.

If the email does not arrive within a few minutes, please also check your spam, junk, or promotions folder.

Requirements for a Successful Activation

For a reliable installation, the scooter should be in its original factory condition.

This means:

• original controller,
• original dashboard,
• original firmware,
• no custom firmware,
• no replaced electronic components, and
• no software manipulations already carried out.

For previously modified vehicles, successful activation cannot be guaranteed.

Future Firmware Updates

Navee or Brightway may release new firmware versions in the future. A manufacturer update can affect or deactivate the unlock or prevent a reinstallation.

Therefore, before every firmware update, check whether the new version is already compatible with the tuning.

Permanent compatibility with future software and firmware versions not yet released at the time of purchase cannot be guaranteed.

Effects on Range and Wear

Higher speeds increase energy consumption. This can reduce the range of the scooter.

In addition, higher speeds can lead to greater stress on the following components:

• Battery
• Motor
• Controller
• Tires
• Brakes
• Chassis
• Screw connections

Therefore, check your scooter regularly and only use the tuning when the vehicle is in a technically flawless condition.

Frequently Asked Questions

Further information on delivery, installation, compatibility, returns, and troubleshooting can be found on our FAQ page.

When inserting, please replace the # character with the correct address of your FAQ page.

Important Safety Information

Riding at increased speed increases the risk of accidents and injuries. The braking distance becomes longer and the stress on the vehicle components increases.

Therefore, observe the following notes:

• Always wear a suitable helmet.
• Use additional protective clothing and protectors.
• Regularly check tires and brakes.
• Check all important screw connections.
• Only use the tuning on a technically flawless scooter.
• Adjust your speed to the conditions and your riding ability.

Installation and use are at your own responsibility.

Legal Notice

By changing the factory speed limit, the e-scooter may lose its operating permit and approval for use on public roads.

With the unlock activated, the vehicle may not be used in public traffic areas unless it is appropriately approved and insured in this condition.

Use is only permitted where the legal regulations allow it, for example:

• on closed-off private property with the owner's consent,
• on non-public test tracks, or
• within the scope of permitted competitions.

Before installation and use, inform yourself about the applicable regulations in your country.

The modification may also affect insurance coverage and the manufacturer's warranty. The buyer or vehicle owner bears responsibility for the installation and use.

Notes on Liability for Defects and Warranty

The statutory provisions apply to liability for defects.

Any existing manufacturer's warranty must be considered separately. The vehicle manufacturer may restrict or refuse benefits under a voluntary warranty in the event of modifications to the vehicle.

Right of Withdrawal for Digital License Codes

This product is a digital license code.

The right of withdrawal may expire as soon as the provision of the digital content has begun, provided you have previously expressly agreed that execution begins before the end of the withdrawal period and have confirmed that you thereby lose your right of withdrawal.

A license code that has already been provided, activated, or used cannot be returned, transferred, or reused for another vehicle.

Therefore, please be sure to check the full model designation and compatibility of your scooter before purchasing.

Conclusion

With Navee/Brightway Instant Tuning, you can adjust the speed limit of a compatible e-scooter within a few minutes via Bluetooth.

No chip, no opening of the scooter, and no structural modification are required. After the one-time setup, you first start the scooter in the limited 20 km/h mode and activate the unlock only when needed via the secret button combination.

Order digitally, receive the license code by email, install with Android, and activate directly on the scooter when needed.